Anker EverFrost Powered Cooler 40 + Extra Battery

EverFrost can be charged 4 different ways: 95W adapter, car charging cable, 100W solar panel, or 60W USB-C port.

For a detached battery, use the solar or USB-C inputs.

For the powered cooler by itself, use the adapter or car charging cable.

EverFrost is not entirely waterproof because the USB port of the battery is exposed. If you can prevent it from being exposed to water, you can take it on a boat or place it near the shore.

• Store EverFrost 12 to 24 hours before its first use.
• Avoid leaving EverFrost in the sun for a long time. Store it in a dry place with shade.
• Fully charge EverFrost before storage and every 3 months during.
• Dump internal water before storage.

They signify 3 protection levels: Low, Medium, High. If you connect EverFrost to a car charging cable, set the protection level to M or H. If you connect it via a battery power source, such as a portable power station, you can set the level to L.

If you lift and tilt EverFrost over 30 degrees, the compressor stops for your safety. Place the powered cooler on level ground for 5 minutes, and you can resume normal use.

Use a 60W or higher USB-C wall charger and USB-C to USB-C cable.
Use the supplied AC adapter and XT-60 converter cable.
Via the XT-60 port, connect a cable to an 11-30V solar panel.

Fully charge the battery. You can use the supplied AC adapter and XT-60 converter cable or choose another method mentioned in Question 1.