Anker Everfrost Powered Cooler 50 + Extra Battery

EverFrost can be charged in four different ways: using the 95W adapter, car charging cable, 100W solar panel, or 60W USB-C port.

For a detached battery, use the solar or USB-C inputs.

For the powered cooler by itself, use the adapter or car charging cable.

EverFrost is not entirely waterproof because the USB port of the battery is exposed. It is suitable for use near water, such as on a boat or by the shore, provided it is kept dry.

• Store EverFrost for 12 to 24 hours before its first use.
• Avoid prolonged exposure to the sun. Store it in a dry, shaded place.
• Fully charge EverFrost before storage and every 3 months during storage.
• Dump any internal water before storing it.

They signify three protection levels: Low, Medium, and High.

If you connect EverFrost to a car charging cable, set the protection level to M or H.

If you connect it via a battery power source, such as a portable power station, you can set the level to L.

If you lift and tilt EverFrost beyond a 30° angle, the compressor will stop to prevent overheating. Place the cooler on level ground for 5 minutes to resume normal use.

• Use a 60W or higher USB-C wall charger with a USB-C to USB-C cable.
• Use the supplied AC adapter and XT-60 converter cable.
• Via the XT-60 port, connect a cable to an 11-30V solar panel.

Fully charge the battery before its first use. You can use the supplied AC adapter and XT-60 converter cable or choose another method mentioned in the previous question.