FAQ
Anker SOLIX F2600 Portable Power Station
Can Anker SOLIX F2600 support simultaneous charging and discharging?+-
Yes, Anker SOLIX F2600 Portable Power Station is certified by UL 1778. It can function as an outdoor power supply with UPS capabilities. It can switch between charging and discharging in less than 20ms.
Should I leave Anker SOLIX F2600 plugged in? Will that reduce battery life?+-
- Turn off all outputs when not in use to avoid energy loss.
- Store in a dry and cool area.
- Check the battery capacity each week. If the battery level is below 30%, charge the power station to 100%. Fully charge it once every 3 months.
How do I connect Anker SOLIX F2600 to the Anker app?+-
- Press the loT button to turn on Bluetooth and Wi-Fi. Connect your devices when the IoT icon appears.
- Press the loT button for 2 seconds to turn off Bluetooth and Wi-Fi.
- Press the loT button for 7 seconds to reset Bluetooth and Wi-Fi.
Why does the power station's battery drain even when no devices are connected?+-
When the AC and car socket control buttons are turned on, there will be a certain amount of no-load power consumption. To avoid this, make sure the AC and car socket control buttons are turned off or turn on Power Saving mode when not in use.
Which solar panels are compatible with Anker SOLIX F2600 Portable Power Station?+-
Anker SOLIX F2600 is compatible with 100W, 200W, and 400W solar panels.
Anker SOLIX BP2600 Expansion Battery
How can I connect or disconnect SOLIX BP2600 Expansion Battery from the power station?+-
To connect, align the cable with the Anker logo in the center and insert it directly. To disconnect, push the knob in the center and turn the cable slightly to the left (12.5 degrees) before pulling it out.
Can I use SOLIX BP2600 Expansion Battery separately?+-
The expansion battery cannot be used separately. It must be connected to the power station to charge or discharge, and to monitor its status via the Anker app.
How should I store the power station and SOLIX BP2600 Expansion Battery?+-
- Turn off all the outputs.
- Store in a dry and cool environment.
- Check the remaining battery capacity each week. If there are only 2 LED lights on (30% left), charge the battery to full. Don't forget to fully charge it once every 3 months.
Which power station is compatible with SOLIX BP2600 Expansion Battery?+-
Both Anker SOLIX F2600 and Anker SOLIX F2000 (PowerHouse 767) are compatible with the expansion battery.
Anker SOLIX PS400 Solar Panel
Why can't the solar panel reach its rated 400W power?+-
The output power of the solar charger is not only related to the weather, but also the area of direct sunlight. For maximum sunlight and larger output power, adjust the position and angle of the solar charger.
Which Anker portable power station is this solar charger compatible with?+-
Anker SOLIX PS400 Solar Panel can charge portable power stations with a maximum voltage of up to 60V and has an MC4 input port. We recommend pairing the solar panels with SOLIX F2000 Portable Power Station.
Is the solar panel waterproof?+-
PS400 Solar Panel has an IP67 certification. It is waterproof and can be used in wet weather. However, the MC4 ports must be covered with the rubber plug before being exposed to rain or water.
Which port does the solar panel have?+-
The solar panel has an MC4 output port.
What's the optimum operating voltage (Vmp) and optimum operating current (Imp) for this solar panel?+-
The optimum operating voltage is 48V, and the optimum operating current is 8.33A.
